Harness Inspection

	Step 1 Check the labels for the harness serial number and ensure that it is legible and the date for withdrawal has not passed.
	Step 2 Run your hands along each piece of webbing looking for cuts, abrasions, burn marks or deterioration.  Check sew patterns for cuts, broken threads, heat damage and stretching.
	Step 3 Check the harness hardware including dee rings and buckles for distortion, cracking and damage.

If you find ANY defects on your harness, remove it from service IMMEDIATELY.  If unsure, please call us on 1300 139 166.  Remember, “IF IN DOUBT, THROW IT OUT!!”